Contact Us

Shower Door Cost Guide for Baltimore Homeowners

The price of a shower door depends on a handful of choices: the style, the glass, the hardware, and what is already in your bathroom. This guide explains what moves the number. Baltimore Glass Company quotes from your actual opening, so you will not get a price from a chart.

Frameless, installed in Baltimore $2,000 to $5,500

The Baltimore Price Index

That is the typical range for a custom frameless shower door or enclosure. Framed and semi-frameless doors generally land below it.

A planning range, not a quote. Your price depends on your panels, glass, hardware, and the condition of your opening. Get yours in writing.

Cost Comparison

Where Each Style Sits on the Price Ladder

Style sets the baseline. Everything else, from glass to hardware, moves your number up or down from there.

Framed Aluminum frame, thinner glass
Lowest
Semi-Frameless Slim metal, cleaner look
Middle
Frameless Thick glass, minimal hardware
$2,000 to $5,500
Lower Higher

Bars show relative position only, not a scale of dollars. Dollar figures appear where we have a typical range to share. Compare the details on our framed, semi-frameless, and frameless pages.

What Moves the Number

Two Frameless Quotes, Two Very Different Prices

Here is what usually pulls a frameless project toward either end of that range.

Factor Toward the lower end Toward the upper end
Panels A door and one panel A door, a return, and fixed panels
Glass thickness 3/8 inch tempered 1/2 inch tempered, with stronger hardware
Glass type Standard clear Low-iron, frosted, rain, or textured. See the Types of Glass Guide
Hardware finish Chrome Matte black, brass, and other specialty finishes
Opening Plumb walls, level curb, tile finished Out-of-plumb walls or a settled curb
Layout and cuts A standard alcove or corner Benches, niches, shaped or oversized panels
Old enclosure Nothing to remove An existing enclosure that has to come out

Directional guide, not a quote. We price your actual opening.

Our Pricing Standard

Transparent Pricing, Spelled Out

  1. A range up front. We tell you where frameless typically lands, about $2,000 to $5,500 installed, so you are never guessing.
  2. Measured, not estimated. We quote from your finished opening, after the tile is set. Never from a price chart.
  3. Everything in writing. The details that set your price are listed in your quote, so you can see what you are paying for.
  4. Compare us line by line. Already have another quote? Send it to us and we will walk through what is and is not in each one.
  5. Straight answers. We tell you what a cheaper option will and will not do, so you can choose with your eyes open.

What Goes in Your Written Quote

  • Style and number of panels
  • Glass thickness and type
  • Hardware finish
  • Old enclosure removal, if any
  • Wall and curb conditions
  • Measuring on site
  • Installation by our crew

Lead time depends on the glass and the job. We give you a timeline before you commit.

Request a Free Quote
The Work Behind the Numbers

Recent Baltimore Installs

Real projects from our crew. Each one shows a different cost driver. Swipe to see more.

Frameless hinged shower door with return panel, matte black hardware, and linear drain in Baltimore, MD
Door plus return panel with matte black hardware
Frameless corner shower enclosure with brass hardware and marble tile installed in Baltimore, MD
Corner enclosure with brass hardware
Frameless fixed-panel walk-in shower screen with dark tile in Baltimore, MD
Fixed-panel walk-in with large glass
Frameless corner shower enclosure with brushed brass hardware beside a soaker tub in Baltimore, MD
Brushed brass hardware beside a soaker tub
Matte black framed neo-angle shower enclosure under a skylight in Baltimore, MD
Neo-angle corner with three panels
Matte black framed hinged shower door with return panel and D-pull handle in Baltimore, MD
Framed hinged door with return panel
Frameless hinged shower door with return panel and chrome hardware against travertine tile in Baltimore, MD
Frameless door with chrome hardware

See the full project gallery

Explore Further

Price Out Your Style

We measure and quote across the Baltimore region.

Since 1928

Get Your Number in Writing

Tell us about your bathroom. We will measure it, price it from your actual opening, and put it in writing.

Request a Free Quote Call (443) 443-5585

Shower Door Cost Questions

  • How much does a custom shower door cost in Baltimore?

    Custom frameless shower doors and enclosures in the Baltimore area typically run about $2,000 to $5,500 installed. Framed and semi-frameless doors generally cost less. Where you land depends on the style, panel count, glass thickness and type, hardware finish, and the condition of your walls and curb. We measure first and quote from your actual opening.

  • Why does frameless cost more than framed or semi-frameless?

    Frameless doors use thicker glass and heavier hardware that carries the weight without a frame. Framed and semi-frameless doors use thinner glass and rely on a frame, which generally keeps the price lower. See our frameless shower doors and semi-frameless shower doors pages for a closer look.

  • Does glass thickness change the price?

    Yes. Thicker glass costs more and needs stronger hardware. We recommend a thickness based on the style and size of your opening.

  • Does the type of glass change the price?

    Yes. Low-iron, frosted, rain, and textured glass cost more than standard clear. Our Types of Glass Guide explains each option.

  • Do hardware finishes change the price?

    They can. Matte black and brass tones usually cost more than chrome, and availability varies by style. We offer matte black, brushed nickel, chrome, polished nickel, satin brass, and oil-rubbed bronze.

  • Can you give me a price over the phone?

    We can talk through what drives the price and give you a planning range, but we quote from measurements because every opening is different. A short call and a photo help us tell you what to expect before we visit. Call (443) 443-5585.

  • Why do you measure after the tile is finished?

    New tile changes the opening by a fraction of an inch or more. We measure the finished opening so the glass is cut to the real dimensions and the quote matches the job.

  • Is removal of my old shower door included?

    Tell us what is there now and we will include removal in the quote if it applies.

  • How long does a custom shower enclosure take?

    Lead time depends on the glass, the hardware, and the job. We give you a timeline before you commit to an order, once we have measured and confirmed the materials.

  • Do you quote shower doors in Towson, Cockeysville, and Annapolis?

    Yes. We quote and install shower enclosures in Baltimore, Towson, Owings Mills, Cockeysville, Dundalk, and Annapolis, and in nearby areas. Call (443) 443-5585 to check your address.

  • How do I get a quote?

    Call (443) 443-5585 or send the quote form. We schedule a time to measure your shower and quote from the actual measurements.